1 creating a serial non-shared command, Figure 62: serial commands, Add new command name – Kramer Electronics WP-501 User Manual
Page 42: Figure 63: serial commands, The new command name, Figure 64: serial commands, Selecting the new command name

K-Config
–
The Driver Manager
– Getting Started
37
5.5.1
Creating a Serial Non-shared Command
To add a serial non-shared command:
1.
In the Serial list, select Non-Shared and click the + icon
The following window appears:
Figure 62: Serial Commands
–Add New Command Name
2.
Type the new command name (for example, DVI_IN) and click OK:
Figure 63: Serial Commands
–the New Command Name
3.
In the Driver Manager window select the new command (DVI_IN):
Figure 64: Serial Commands
–Selecting the New Command Name