3 firmware upgrade, Firmware upgrade, Figure 217: knet id – Kramer Electronics WP-501 User Manual
Page 127: Setting k-net id, Figure 218: knet id, K-net id assigned, Figure 219: firmware update window

122
K-Config - Connecting to the Device
Figure 217: KNET ID
– Setting K-NET ID
4.
Click OK to set the ID number.
Figure 218: KNET ID
–K-NET ID assigned
10.3
Firmware Upgrade
Before uploading a new firmware to a device, make certain that the firmware you have selected
matches the connected device. In some cases, it will be possible to upload firmware that does not
match a device, resulting in inoperability of the device.
Before uploading a new firmware to a device, disconnect it from Site-CTRL and Web Access.
To load new firmware:
1.
Check for the latest firmware at:
2.
Connect the device.
3.
Select Firmware Update from the Device menu.
The Firmware Update window appears:
Figure 219: Firmware Update Window
4.
Select the device to upgrade from the Select Device for FW Upgrade list box (SL-10 in this example).
You can select the Master Controller or any of the auxiliary devices connected.
!
i