Figure 76: serial reply commands, Selecting a serial reply command, Figure 77: serial reply commands – Kramer Electronics WP-501 User Manual
Page 49: Reading the serial reply command

44
K-Config - The Driver Manager
– Getting Started
Figure 76: Serial Reply Commands
– Selecting a Serial Reply Command
3.
Connect the device to your PC.
4.
Click the test command button.
The Connection Method window opens.
5.
Click Connect.
6.
Click the Select Port button, select the relevant port and click the Select Port button.
7.
Click Test Command
The reply appears in the command syntax area:
Figure 77: Serial Reply Commands
– Reading the Serial Reply Command
8.
Click Set.
The Serial Reply was added to the shared Serial Reply>Power list.