Figure 55: the driver manager, Selecting pwr_on from the power command group, Figure 56: the driver manager – Kramer Electronics WP-501 User Manual
Page 39: Copying pwr_on from the command name box, Figure 57: the driver manager, The non shared command group
34
K-Config - The Driver Manager
– Getting Started
2.
Select the standard name for "Power: On" in the Power Command Group:
Figure 55: The Driver Manager
– Selecting PWR_ON from the Power Command Group
3.
Copy the standard name from the Command Name text box:
Figure 56: The Driver Manager
– Copying PWR_ON from the Command Name box
4.
Open the Non-Shared command group.
The Non-Shared command group includes the imported device commands. Select the relevant command,
"Power: On".
Figure 57: The Driver Manager
– the Non Shared Command Group