3 installing kramer k-config software, Installing kramer k-config software, Figure 9: usb driver installation – Kramer Electronics WP-501 User Manual
Page 13: Usb recognized on pc, Figure 10: setting a working directory

8
K-Config - Kramer K-Config Software Installation
Figure 9: USB Driver Installation
–USB Recognized on PC
3.3
Installing Kramer K-Config Software
To download Kramer K-Config from the Internet (note that file names are liable to change from time to time):
1.
and download the file: “Kramer K-Config.zip”
from the DOWNLOADS section.
2.
Extract the file “Kramer K-Config.zip” package, which includes the Kramer K-Config application setup and the
Kramer device drivers, to a folder (for example, C:\Program Files\Kramer K-Config).
3.
Install the Kramer K-Config application.
4.
Click OK.
The following window appears (see
Figure 10: Setting a Working Directory
5.
Select or create a new working directory (see
The working directory will keep the information that is essential for operating the software. This information will remain
unchanged while upgrading the software