Kramer Electronics WP-501 - Manual (Page 111)

106 K-Config - Adding Actions to a Trigger
Figure 191: Panels Status – Selecting a Button
Note that only the relevant actions are available.
2. Click the colored button to set the color intensity and behavior of the selected button:
Figure 192: Panels Status – Selecting a Button
You can set the:
 Button Behavior to No Change (there is no other change in the current button behavior except for the
color change), On, Off, Slow Blink or Fast Blink
 Color Intensity to one of three levels of intensity by selecting a color in the appropriate row
 Color Selection to any of the available colors
The button display shows the selected color.
3. Click OK after setting the button color and behavior.
The panel button shows the selected color and an icon representing its behavior. The button behavior also
appears in the Button Status box next to the colored button.