Kramer Electronics WP-501 User Manual
Page 2

K-Config
– Contents
i
Contents
Kramer K-Config Software Installation
Installing the “.NET Framework” Revision 2.0 Software
Installing Kramer K-Config Software
Initially Importing the Drivers
Getting to Know the Driver Manager
The Commands Tree Editor (Commands Hierarchy)
Defining the Control Room via the Project Navigator
Assigning the Peripheral Devices to Master and Auxiliary Device Ports
Assigning a Peripheral Device Driver to an RS-232 / RS-485 / IR Port
Setting the Functionality of the GPI/O Port
Assigning a Peripheral Device Driver to an Ethernet Port
Syncing the Configuration to the Device
Reading the Configuration from the Device
Clear Configuration from Device
Figures
Figure 1: Media Room Components List
Figure 2: USB Driver Installation
Figure 3: USB Driver Installation
– Select USB Driver Properties
Figure 4: USB Driver Installation
Figure 5: USB Driver Installation
Figure 6: USB Driver Installation
Figure 7: USB Driver Installation
Figure 8: USB Driver Installation
Figure 9: USB Driver Installation
Figure 10: Setting a Working Directory
Figure 11: Change the Working Directory Window
Figure 12: Drive Database Loaded
Figure 13: Installation Complete
Figure 15: Driver Database Notice