3 the leds light, Figure 196: panel status, Leds light states – Kramer Electronics WP-501 User Manual
Page 114

K-Config
–
Adding Actions to a Trigger
109
9.4.3
The LEDs Light
The LEDs light (located next to a digital audio knob) lets you select a device and set the behavior of its LEDs, see
To define the LED lights behavior:
1.
Click
the “LEDs” on the left side of the knob.
Figure 196: Panel Status
– LEDs Light States
2.
Select the desired state:
Animation Up:
Animation Down:
Custom:
All Off: