Campbell Scientific LoggerNet Datalogger Support Software - Manual (Page 539)

Appendix E. Log Files
TABLE E-1. Transaction Log Messages
Code Message Text Message Parameters Message Meaning
User Response to
Message
36 Logger table
definitions have
changed
The server has
detected a change in
the table definitions
in the datalogger.
A change in table
definitions indicates
that the datalogger
program may have
changed. Before
updating table
definitions make sure
the needed data in the
data cache has been
saved to a file if
desired.
37 Updating
BMP1 network
description
The network
description in the RF
base is being updated
to reflect changes in
collection schedule or
stations to collect.
38 BMP1 network
description
update
complete
The RF base has
acknowledged the
network description
update.
39 BMP1 network
description
update failed
The network
description update to
the RF base has
either timed out or
communication has
failed.
Check the connections
from the PC to the RF
base.
40 Datalogger
message
Severity (S for Status, W
for Warning, F for Fault);
Message text.
This is a message that
has been generated
by the datalogger (or
in some cases the RF
base on behalf of the
datalogger).
Datalogger warning and
fault messages should
be investigated using
the datalogger operators
manual or contacting an
applications engineer at
Campbell Scientific.
41 Records
received
Table name; Beginning
record number; Ending
record number
Datalogger records
have been received
and stored in the data
cache.
42 A datalogger
transaction has
timed out
Time out period in
milliseconds
The server has waited
longer than the
allotted time for the
expected response to
a transaction.
Determine the reason
for the timeout. This is
usually due to a
problem with the
communications path
between the PC and the
datalogger.
43 Terminal
emulation
transaction
started
Terminal emulation
message has been
sent to the
datalogger.
E-7