Campbell Scientific LoggerNet Datalogger Support Software - Manual (Page 425)

Section 10. Utilities Installed with LoggerNet
station’s version number. Variables that can have multiple instances are
represented as subscripted arrays. The size of these arrays will depend upon
the value read from the variable that is defined as the “dimensioning” variable.
If the value of this variable ever changes, the LoggerNet server will evaluate
whether the current table definitions should be changed. If the current table
definition already defines enough values to match the current value, no change
will take place. If, however, the dimensioning value is larger than the current
dimension, the current table will be deleted and a new table created in its place.
Refer to the online help to see the variables defined for each table.
10.4 File Format Convert
File Format Convert is not available from the LoggerNet toolbar. It can be
opened from the Window’s Start menu under Programs | Campbell Scientific |
LoggerNet | Utilities
10.4.1 Overview
File Format Convert is used to convert data files from one format to another. It
can also perform the following functions:
• Break large files into smaller files (also known as baling).
• Check for missing records by checking the record number and or
timestamp.
• Bale based on time
• Bale based on File Marks and Remove Marks (TOB2,TOB3 files)
• Bale files when missing records are discovered.
• Fill in missing records with ‘Null’ or empty records.
More than one of the above functions can be performed in one pass.
In general files can be converted from:
• TOA5
• TOACI1
• TOB2
• TOB3
• TOB1
• CSIXML
10-19