Campbell Scientific LoggerNet Datalogger Support Software - Manual (Page 416)

Section 10. Utilities Installed with LoggerNet
10.2.2.5 Scripting CoraScript Commands
To automate network processes, scripts can be created with other scripting
language tools that would call the CoraScript interpreter, and send commands
to the LoggerNet server. This provides an alternate means of controlling data
collection, hole collection and maintenance functions such as clock check and
set.
10.3 RWIS Administrator
10.3.1 Overview
The RWIS Administrator is a LoggerNet client that provides support for
communication with RWIS (Road Weather Information Systems) weather
stations. With the RWIS Administrator, LoggerNet is able to communicate
with any station that implements the NTCIP (National Transportation
Communications for ITS Protocol) ESS (Environmental Sensor Station)
interface using SNMP (Simple Network Management Protocol) over TCP/IP.
The first time that the utility is run, the application will have an appearance
similar to that shown below:
10-10