HP XP Continuous Access Software - Manual (Page 88)

88 HP StorageWorks Disk Array XP RAID Manager: User’s Guide
Windows NT/2000/2003 systems
The $HORCMPERM variable is set by default to either
\WINNT\horcmperm.conf
or \WINNT\horcmperm*.conf (where * is
the instance number).
'type $HORCMPERM | x:\HORCM\etc\raidscan.exe -find inst'
# The following is an example to permit DB Volumes.
# Note: a numerical value is interpreted as Harddisk#.
# DB0 For MU# 0
Hd0-10
harddisk12 harddisk13 harddisk17
# DB1 For MU# 1
hd20-23
Verifying a group for DB1:
The following example shows how to verify whether a DB volume group is
correctly mapped to a horcm.conf group (MU#1 for BC).
D:\HORCM\etc> set HORCC_MRCF=1
D:\HORCM\etc> echo hd20-23 | raidscan -find verify 1 -fd
DEVICE_FILE Group PairVol Device_File M SERIAL LDEV
Harddisk20 oradb1 oradev1 Harddisk20 1 35013 17
Harddisk21 oradb1 oradev2 Harddisk21 1 35013 18
Harddisk22 oradb oradev3 Harddisk22 1 35013 19
Harddisk23 - - - 1 35013 20