Creating an instance configuration file, Creating an instance configuration file 42 – HP XP Continuous Access Software User Manual
Page 42
42
HP StorageWorks Disk Array XP RAID Manager: User’s Guide
MPE/iX
An example horcm.conf file can be found in the /HORCM/etc directory.
See Appendix E, Porting notice for MPE/iX
Open VMS
See Appendix F, Porting notice for OpenVMS
Creating an instance configuration file
When you create an RM configuration file, follow this naming convention,
where instance is the instance number:
horcminstance.conf
Example
horcm0.conf
The configuration file has four sections:
HORCM_MON
HORCM_CMD
HORCM_DEV
HORCM_INST
You can use the mkconf command to create a configuration file. See
mkconf
for usage information.
If the level of detail provided in the following pages is not sufficient, ask
your HP representative to consult the HP internal document:
RAID Manager XP Basic Specifications
For examples of configuration files, see Appendix A, “Configuration file
examples”