HP XP Continuous Access Software - Manual (Page 203)

203
–f[d] d displays the Device_File that was registered to the
RM Group in the output, based on the LDEV (as
defined in the local instance configuration definition
file).
If this option is specified, the –f[f] and –f[g] options are
invalid.
–f[e] Displays the serial number and LDEV number of the
external LUNs mapped to the LDEV.
If the external LUN mapped to the LDEV on a
specified port does not exist, then this option will do
nothing. If this option is specified, the -f[f][g][d]
options are not allowed.
Example
# raidscan -p cl1-a-0 -fe -CLI
PORT# /ALPA/C TID# LU# Seq# Num LDEV# P/S Status Fence E-Seq# E-LDEV#
CL1-A-0 ef 0 0 48 62468 2 256 SMPL - - 30053 17
CL1-A-0 ef 0 0 49 62468 2 272 SMPL - - 30053 23
CL1-A-0 ef 0 0 50 62468 1 288 SMPL - - 30053 28
28
E-Seq#. Displays the production (serial) number of the
external LUN.
E-LDEV#. Displays the LDEV# of the external LUN.
–find (HP-UX, Linux, Solaris, Windows NT/2000/2003, and
MPE/iX only)
Used to display the Port, targetID, LUN
(in RAID Manager notation) that was mapped to a
LDEV using a special (raw device) file provided via
STDIN.
If the target and LUN are unknown, this option can be
used to discover the Port, targetID, LUN associated
with a host device file so that the information can be
included in a horcm.conf file.