HP XP Continuous Access Software - Manual (Page 229)

229
The following example executes SYNC for specified directory mounted
volume.
pairsplit -x sync D:\hd1
[SYNC] D:\hd1 HarddiskVolume8
The following example executes SYNC for the directory mounted volumes
identified by the directory pattern “D:\h”.
pairsplit -x sync D:\h
[SYNC] D:\hd1 HarddiskVolume8
[SYNC] D:\hd2 HarddiskVolume9
The following example executes SYNC for all of the volumes on the
logical drives with directory mount volumes.
pairsplit -x sync all
[SYNC] C: HarddiskVolume1
[SYNC] D:\hd1 HarddiskVolume8
[SYNC] D:\hd2 HarddiskVolume9
[SYNC] G: HarddiskVolume10
The following example flushes HarddiskVolumeX:
pairsplit -x sync \VolX
The following example executes sync from a sub-command option of
pairsplit
. After flushing remaining data to the logical drives C: and D:,
Read/Write access to the secondary volume is enabled.
pairsplit -x sync C: D: -g oradb -rw
The following example executes sync from a sub-command option of
pairsplit
. After flushing remaining data to harddisk2 and harddisk3,
Read/Write access to the secondary volume is enabled in simplex mode.
pairsplit -x sync hdisk2 hdisk3 -g oradb -S