HP XP Continuous Access Software - Manual (Page 136)

136 HP StorageWorks Disk Array XP RAID Manager: User’s Guide
Maximum number:
XP256 16 (0-15)
XP512 64 (0-63)
XP1024 128 (0-127)
XP10000 256 (0-255)
XP12000 256 (0-255)
The CTGID option forces creation of paired volumes
for a given CTGID group.
–g group Specifies the group to be paired; the group name is
specified in the HORCM_DEV section of the RM
instance configuration file.
The command executes for the entire group unless the
–d pair_vol argument is specified.
–h Displays Help/Usage, and version information.
–m mode The following modes may be specified:
noread (BC only) S pecifies that the S-VOL is
unreadable while the paired volumes are in the PAIR
state. This mode is useful for hiding S-VOLs. By
default, the S-VOL is readable even when in the PAIR
state.
cyl (XP1024/XP12000 CA only) Specifies that a
bitmap table is managed with each cylinder on CA
volumes.
trk (XP1024/XP12000 CA only) Specifies that a bitmap
table is managed with each track on CA volumes.
If cyl or trk are not specified, the default bitmap table
identified below is used.
RAID CA Volumes Default Bitmap table
XP1024 OPEN-3/9 Track
OPEN-E/L/M Cylinder