HP XP Continuous Access Software - Manual (Page 195)

195
Explanation of Terms
1 Status is TRUE.
0 Status is FALSE.
x Status is TRUE or FALSE (don’t care).
COPY* Status is either COPY or RCPY.
PFUL Since the PFUL state refers to the High Water Mark of
the Side File in PAIR state, the PFUL state is displayed
as PAIR by all commands except pairvolchk and the
–fc
option of the pairdisplay command.
PFUS Since the PFUS state is referring to a Suspend state
with the Side File Full, the PFUS state is displayed as
PSUS by all commands except pairvolchk and the –fc
option of the pairdisplay command.
SVOL_PSUS Displayed as SSUS by the pairdisplay command.
Error Codes
The table lists specific error codes for the pairvolchk command.
Examples
CA Async:
# pairvolchk -g oradb
pairvolchk:Volstat is P-VOL.[status=PAIR fence=ASYNC CTGID=2 MINAP=2
CA Sync:
# pairvolchk -g oradb
pairvolchk : Volstat is P-VOL.[status = PAIR fence = DATA MINAP = 2 LDEV =BLOCKED]
Category Error Code Error Message Value
Volume status
unrecoverable EX_ENQVOL Unmatched volume status within the group 236
EX_EVOLCE Pair volume combination error 235