HP XP Continuous Access Software - Manual (Page 148)

148 HP StorageWorks Disk Array XP RAID Manager: User’s Guide
JID . The journal group ID for the P-VOL or S-VOL. If
the volume is not a CA-Journal volume, “-” will be
displayed.
AP . The number of active paths in to the P-VOL. If this
is not known, “-” will be displayed.
CM. Copy mode. “N” is for non-SnapShot. “S” is for
SnapShot. “C” is for cruising copy.
EM . displays the external connection mode.
H = a mapped E-LUN hidden from the host.
V = a mapped E-LUN visible to the host
- = a unmapped E-LUN
BH = a mapped E-LUN hidden from the host with a
blocked LDEV
BV = a mapped E-LUN hidden from the host with a
blocked LDEV
B = an unmapped E-LUN with a blocked LDEV
E-Seq# : The production (serial) number of the external
LUN, “-” represents an unknown number.
E-LDEV# : The LDEV# of the external LUN. “-”
represents an unknown number.
–FCA [MU#] Displays a cascading CA volume in a combination CA
and BC environment. If the –l option is specified, this
option displays a cascading CA volume on a local host
(near site). If no –l option is specified, then this option
displays a cascading CA volume on a remote host (far
site).
The MU# specifies the cascading mirror descriptor for
CA-Journal.
–FBC [MU#] Specifies a cascading BC volume in a combination BC
and CA environment. If the –l option is specified, this
option displays a cascading BC volume on a local host
(near site). If no –l option is specified, then this option
displays a cascading BC volume on a remote host (far
site).