Startup procedures using a detached process – HP XP Continuous Access Software User Manual
Page 386
386
HP StorageWorks Disk Array XP RAID Manager: User’s Guide
$ inqraid DKA148
sys$assign : DKA148 -> errcode = 2312
DKA148 -> OPEN: no such device or address
After enabling the S-VOL for writing by using either the pairsplit or
horctakeover
command, you will need to execute the mcr sysman
command to use the S-VOLs for backup or disaster recovery.
$ pairsplit -g CAVG –rw
$ mcr sysman
SYSMAN> io auto
SYSMAN> exit
$ sh dev dg
Startup procedures using a detached process
Creates the shareable logical name for RAID if undefined initially. RAID
Manager needs to define the physical device ($1$DGA145…) as either
DG*, DK* or GK* by using the SHOW DEVICE command and the
DEFINE/SYSTEM
command, but then does not need to be mounted in
RM versions 01.12.03 and earlier.
$ show device
DKA152
CL1-H
30009 152
-
s/s/ss
0004
5:01-11 OPEN-9
DKA153
CL1-H
30009 153
-
s/s/ss
0004
5:01-11 OPEN-9
Device
Device
Error Volume
Free
Trans
Mnt
Name
Status
Count Label Blocks Count
Cnt
$1$DGA145:
(VMS4)
Online
0
$1$DGA146:
(VMS4)
Online
0
$1$DGA147:
(VMS4)
Online
0
$1$DGA148:
(VMS4)
Online
0
$1$DGA149:
(VMS4)
Online
0
$1$DGA150:
(VMS4)
Online
0
$1$DGA151:
(VMS4)
Online
0
$1$DGA152:
(VMS4)
Online
0
$1$DGA153:
(VMS4)
Online
0