HP XP Continuous Access Software - Manual (Page 387)

Porting notice for OpenVMS 387
$ DEFINE/SYSTEM DKA145 $1$DGA145:
$ DEFINE/SYSTEM DKA146 $1$DGA146:
:
:
$ DEFINE/SYSTEM DKA153 $1$DGA153:
Defining the environment for RAID Manager in LOGIN.COM
You need to define the path for the RAID Manager commands to
DCL$PATH
as the foreign command.
$ DEFINE DCL$PATH
SYS$POSIX_ROOT:[horcm.usr.bin],SYS$POSIX_ROOT:
[horcm.etc]
If the RAID Manager command and the RM daemon (HORCM) will be
executing in different jobs (using a different terminal), then you must
redefine LNM$TEMPORARY_MAILBOX in the
LNM$PROCESS_DIRECTORY table as shown below:
$ DEFINE/TABLE=LNM$PROCESS_DIRECTORY
LNM$TEMPORARY_MAILBOX LNM$GROUP
Discovering and describing the command device on
sys$posix_root:[etc]horcm0.conf
$ inqraid DKA145-151 -CLI
Device Device Error Volume Free Trans Mnt
Name Status Count Label Blocks Count Cnt
$1$DGA145: (VMS4) Online 0
$1$DGA146: (VMS4) Online 0
:
:
$1$DGA153: (VMS4) Online 0
$
DEVICE_FILE PORT SERIAL LDEV CTGC/B/12 SSID R:Group PRODUCT_ID