HP XP Continuous Access Software - Manual (Page 228)

228 HP StorageWorks Disk Array XP RAID Manager: User’s Guide
If the specified logical drive has directory mount
volumes, then SYNC is executed for all of the volumes
on the logical drive.
[\directory|\directory pattern] (Windows 2000/2003
only)
Specifies the directory mount point on the logical
drive.
If directory is specified, then SYNC is executed for the
specified directory mounted volume only.
If a directory pattern is specified then SYNC is
executed for the directory mounted volumes identified
by directory pattern.
all Data is flushed to all logical drives (and the physical
drives corresponding to the logical drives assuming that
they are hard disks), excluding the logical drive used by
RM and the logical drive supporting the current
Windows directory.
D Data is flushed to the specified logical (and the
corresponding physical) drive.
Volume#... (Windows 2000/2003 only) The LDM Volumes to be
flushed. Volume# must be specified in LDM format:
'\Vol# or \Dms# or \Dmt# or \Dmr# '
Example
C:\HORCM\etc>raidscan -x sync Volume{cec25efe-d3b8-11d4-aead-00c00d003b1e}
[SYNC] Volume{cec25efe-d3b8-11d4-aead-00c00d003b1e}
Examples
The following example executes SYNC for all of the volumes on a logical
drive.
pairsplit -x sync D:
[SYNC] D: HarddiskVolume2
[SYNC] D:\hd1 HarddiskVolume8
[SYNC] D:\hd2 HarddiskVolume9