HP XP Continuous Access Software - Manual (Page 180)

180 HP StorageWorks Disk Array XP RAID Manager: User’s Guide
The command is executed for the specified group
unless the –d pair_vol option is specified.
–d pair_vol Used to specify a logical (named) volume that is
defined in the configuration definition file. When this
option is specified, the command is executed for the
specified paired logical volumes.
– d[g] raw_device [ MU# ]
(HP-UX, Linux, Solaris, Windows NT/2000/2003, AIX,
and MPE/iX only)
Searches the RM configuration file
(local instance) for a volume that matches the specified
raw device. If a volume is found, the command is
executed on the paired volume (–d) or group (–dg).
This option is effective without specification of the
–g
group option.
If the specified raw_device is listed in multiple device
groups, this will apply to the first one encountered.
–d [g] <seq#> <LDEV#> [MU#]
Searches the RM instance configuration file (local
instance) for a volume that matches the specified
sequence # and LDEV. If a volume is found, the
command is executed on the paired logical volume (–d)
or group (–dg).
This option is effective without specification of the
–g
group option.
If the specified LDEV is listed in multiple device
groups, this will apply to the first one encountered.
seq # LDEV # can be specified in hexadecimal (by the
addition of 0x) or decimal format.