HP XP Continuous Access Software - Manual (Page 388)

388 HP StorageWorks Disk Array XP RAID Manager: User’s Guide
SYS$POSIX_ROOT:[etc]horcm0.conf
HORCM_MON
#ip_address service poll(10ms timeout(10ms)
127.0.0.1 30001 1000 3000
HORCM_CMD
#dev_name dev_name dev_name
DKA145
You will have to start HORCM without a description for HORCM_DEV
and HORCM_INST because target ID and LUN are unknown.
You can determine the mapping of a physical device with a logical name by
using raidscan -find.
Executing a “horcmstart 0”
$ run /DETACHED SYS$SYSTEM:LOGINOUT.EXE
/PROCESS_NAME=horcm0 -
_$ /INPUT=VMS4$DKB100:[SYS0.SYSMGR.][horcm]
loginhorcm0.com -
_$ /OUTPUT=VMS4$DKB100:[SYS0.SYSMGR.][horcm]run0.out -
_$ /ERROR=VMS4$DKB100:[SYS0.SYSMGR.][horcm]run0.err
%RUN-S-PROC_ID, identification of created process is
00004160
DKA145 CL1-H 30009 145 - - - - OPEN-9-CM
DKA146 CL1-H 30009 146 - s/S/ss 0004
5:01-11
OPEN-9
DKA147 CL1-H 30009 147 - s/P/ss 0004
5:01-11
OPEN-9
DKA148 CL1-H 30009 148 - s/S/ss 0004
5:01-11
OPEN-9
DKA149 CL1-H 30009 149 - s/P/ss 0004
5:01-11
OPEN-9
DKA150 CL1-H 30009 150 - s/S/ss 0004
5:01-11
OPEN-9
DKA151 CL1-H 30009 151 - s/P/ss 0004
5:01-11
OPEN-9