HP XP Continuous Access Software - Manual (Page 302)

302 HP StorageWorks Disk Array XP RAID Manager: User’s Guide
Commands from HOSTB shown on page 298 (group Oradb)
• Set the HORCC_MRCF environment variable. (If C shell)
# setenv HORCC_MRCF 1
(Windows NT/2000/2003) set HORCC_MRCF=1
• Designate a group name and a remote host P-VOL:
# paircreate -g Oradb -vr
This command begins a pair coupling between the two pairs of
volumes designated as Oradb in the configuration definition file.
• Designate a volume name (oradev1) and a remote host P-VOL:
# paircreate -g Oradb -d oradev1 -vr
In the example configuration, this pairs CL1-A, T1, L1 and
CL1-B, T2, L1
• Designate a group name and confirm pair volume state:
# pairdisplay -g Oradb
Group PairVol(L/R) (Port#,TID,LU-M), Seq#, LDEV#..P/S, Status, Seq#, P-LDEV# M
oradb oradev1(L) (CL2-B, 2, 1-0) 30053 20..S-VOL COPY ----- 18 -
oradb oradev1(R) (CL1-A, 1, 1-0) 30053 18..P-VOL COPY 30053 20 -
oradb oradev2(L) (CL2-B, 2, 2-0) 30053 21..S-VOL COPY ----- 19 -
oradb oradev2(R) (CL1-A, 1, 2-0) 30053 19..P-VOL COPY 30053 21 -