HP XP Continuous Access Software - Manual (Page 287)

Configuration file examples 287
The following shows an example of the (raw) control device file format that
must be used. HOSTx = HOSTA, HOSTB, etc...
• HP-UX
HORCM_CMD for HOSTx ... /dev/rdsk/c0t0d1
• Solaris
HORCM_CMD for HOSTx ... /dev/rdsk/c0t0d1s2
• AIX
HORCM_CMD for HOSTx ... /dev/rhdiskNN
Where NN is the device number assigned automatically by AIX.
• Digital UNIX
HORCM_CMD for HOSTx ... /dev/rrzbNNc
Where NN is device number (BUS number
× 8 + target ID) defined by
Digital UNIX.
• DYNIX/ptx
HORCM_CMD for HOSTx ... /dev/rdsk/sdNN
Where NN is the device number assigned automatically by
DYNIX/ptx.
• Windows NT/2000/2003
HORCM_CMD for HOSTx ... \\.\PhysicalDriveN or
\\.\Volume{GUID}
for Windows2000/2003
Where N is the device number assigned automatically by
Windows NT/2000/2003.
• Linux, xLinux
HORCM_CMD for HOSTx ... /dev/sdN
Where N is the device number assigned automatically by
Linux/xLinux.