HP XP Continuous Access Software - Manual (Page 208)

208 HP StorageWorks Disk Array XP RAID Manager: User’s Guide
–z Makes this command enter interactive mode.
–zx (Not for use with MPE/iX or OpenVMS) Prevents using
RM in interactive mode.
–m MU# Displays the cascading mirror descriptor. If you specify
the –CLI option, raidscan will not display the
cascading mirror (MU1-4).
-m all will display all cascading mirror descriptors.
Output Fields
Port# The port name on the disk array.
ALPA/C Arbitrated loop physical address of the port on the disk
array.
TargetID#(TID#)
The SCSI/Fibre Channel target ID of specified port.
LUN#(LU#) The logical unit number of specified target ID in the
disk array.
Num(LDEV#...) The number of LDEV and LDEV# that used LUSE
volume on the disk array.
P/S The (P-VOL, S-VOL) attribute of a volume.
Status The status of the paired volume in the disk array.
P-Seq# Seq# (production serial number) of the pair partner
array.
P-LDEV# LDEV# of the partner that becomes a pair in or among
the disk array.
Vol.Type Type name of volume mapped to LUN.
Group The group name (dev_group) described in the
configuration definition file.