HP XP Continuous Access Software - Manual (Page 142)

142 HP StorageWorks Disk Array XP RAID Manager: User’s Guide
paircurchk
Check S-VOL data consistency CA only
Description
The paircurchk command displays pairing status in order to allow the
operator to verify the completion of pair generation or pair
resynchronization. This command is also used to confirm the paired
volume connection path (physical link of paired volume to the host).
The granularity of the reported data is based on the volume or group.
Syntax
paircurchk { –g group | –d pair_vol
| –d[g] raw_device [ MU# ] | –d[g]
seq# LDEV# [ MU# ]
| –h | –nomsg | –q | –z | –zx }
Arguments
–d pair_vol Specifies a paired volume name written in the
configuration definition file. The command executes
only for the specified paired volume.
–d [g] raw_device [ MU# ]
(HP-UX, Linux, Solaris, MPE/iX, AIX, and
Windows NT/2000/2003 only)
Searches the RM
configuration file (local instance) for a volume that
matches the specified raw device. If a volume is found,
the command is executed on the paired volume (–d) or
group (–dg).
This option is effective without specification of the
–g group option.
If the specified raw_device is listed in multiple device
groups, this applies to the first one encountered.
–d [g] seq# LDEV# [ MU# ]
Searches the RM instance configuration file (local
instance) for a volume that matches the specified
sequence # and LDEV. If a volume is found, the
command is executed on the paired logical volume (–d)
or group (–dg).