HP XP Continuous Access Software - Manual (Page 52)

52 HP StorageWorks Disk Array XP RAID Manager: User’s Guide
HORCM_LDEV section
Description
The HORCM_LDEV section specifies stable LDEV#’s and Serial#’s of
physical volumes that correspond to paired logical volume names. Each
group name is unique and typically has a name fitting its use (e.g. database
data, Redo log file, UNIX file). The group and paired logical volume name
described in this item must also be known to the remote server.
NOTE: HORCM_LDEV is for XP10000/XP12000 use only
Syntax
HORCM_LDEV
device_group device_name Serial# CU:LDEV(LDEV#) MU#
device_group Each device group contains one or more volumes. This
parameter gives you the capability to act on a group of
volumes with one RM command. The device group can
be any user-defined name up to 31 characters in length.
device_name User-defined and unique to the instances using the
device groups. It can be up to 31 characters in length
and is a logical name that can be used instead of the
physical Port/TID/LUN/MU# designation.
Serial# Serial number of the array
CU:LDEV(LDEV#) Specifies the LDEV number in three possible formats:
• As hex used by the SVP or Web console
Example (LDEV# 260) 01: 04
• As decimal used by the inqraid command
Example (LDEV# 260) 260
• As hex used by the inqraid command
Example (LDEV# 260) 0x104
Example HORCM_LDEV
#dev_group dev_name Serial# CU:LDEV(LDEV#) MU#
oradb dev1 30095 02:40 0
oradb dev2 30095 02:41 0