HP XP Continuous Access Software - Manual (Page 314)

314 HP StorageWorks Disk Array XP RAID Manager: User’s Guide
CA/BC cascaded connection command examples
Commands from HOSTA and HOSTB shown on page 311
The following examples employ RM commands from HOSTA and
HOSTB.
• Set the HORCC_MRCF environment variable. (If C shell)
# setenv HORCC_MRCF 1
(Windows NT/2000/2003) set HORCC_MRCF=1
• Designate a group name (Oradb) on the CA environment of HOSTA:
# paircreate -g Oradb -vl
• Designate a group name (Oradb1) on the BC environment of
HOSTB:
# paircreate -g Oradb1 -vl
This command begins a pair coupling between the four pairs of
volumes designated as Oradb and Oradb1 in the configuration
definition file.
• Designate a group name and confirm pair volume state on HOSTA:
# pairdisplay -g oradb –m cas
Group PairVol(L/R) (Port#,TID,LU-M), Seq#, LDEV#..P/S, Status, Seq#, P-LDEV# M
oradb oradev1(L) (CL1-A, 1, 1-0) 30053 266..SMPL ---- ----- ---- -
oradb oradev1(L) (CL1-A, 1, 1) 30053 266..P-VOL COPY 30053 268 -
oradb1 oradev11(R) (CL1-D, 2, 1-0) 30053 268..P-VOL COPY 30053 270 -
oradb2 oradev21(R) (CL1-D, 2, 1-1) 30053 268..SMPL ---- ----- ---- -
oradb oradev1(R) (CL1-D, 2, 1) 30053 268..S-VOL COPY ----- 266 -
oradb oradev2(L) (CL1-A, 1, 2-0) 30053 267..SMPL ---- ----- ---- -
oradb oradev2(L) (CL1-A, 1, 2) 30053 267..P-VOL COPY 30053 269 -
oradb1 oradev12(R) (CL1-D, 2, 2-0) 30053 269..P-VOL COPY 30053 271 -
oradb2 oradev22(R) (CL1-D, 2, 2-1) 30053 269..SMPL ---- ----- ---- -
oradb oradev2(R) (CL1-D, 2, 2) 30053 269..S-VOL COPY ----- 267 -