HP XP Continuous Access Software - Manual (Page 167)

167
Syntax
pairresync { –nomsg | –g group | –d pair_vol | –d[g] raw_device [ MU# ]
| –d[g] seq# LDEV# [ MU# ] | –c size | –FCA [MU#] | –FBC | –h | –l |
–nomsg
| –q | –restore | –swap[s|p] | –z | –zx }
Arguments
–c size Used to specify the number of tracks (1 to 15) copied in
parallel. If omitted, the default is the value used at time
of paircreate.
–d pair_vol Specifies a paired volume name written in the
configuration definition file. The command executes
only for the specified paired volume.
–d [g] raw_device [MU#]
(HP-UX, Linux, Solaris, Windows NT/2000/2003, AIX,
and MPE/iX only)
Searches the RM configuration file
(local instance) for a volume that matches the specified
raw device. If a volume is found, the command is
executed on the paired volume (–d) or group (–dg).
This option is effective without specification of the
–g group option.
If the specified raw_device is listed in multiple device
groups, this applies to the first one encountered.
–d [g] seq# LDEV# [MU#]
Searches the RM instance configuration file (local
instance) for a volume that matches the specified
sequence # and LDEV. If a volume is found, the
command is executed on the paired logical volume
(–d) or group (–dg).
This option is effective without specification of the
–g group option.
If the specified LDEV is listed in multiple device
groups, this applies to the first one encountered.
seq # LDEV # can be specified in hexadecimal (by the
addition of 0x) or decimal format.