HP XP Continuous Access Software - Manual (Page 293)

Configuration file examples 293
Commands from HOSTB in the figure on page 290
The following examples employ RM commands from HOSTB.
• Designate a group name and a remote host P-VOL:
# paircreate -g Oradb -f never -vr
This command begins a pair coupling between the volumes designated
as Oradb in the configuration definition file and begins copying the
two pairs (in the example configuration).
• Designate a volume name (oradev1) and a remote host P-VOL:
# paircreate -g Oradb -d oradev1 -f never -vr
This command begins a pair coupling between the volumes designated
as oradev1 in the configuration definition file.
In the example configuration, this pairs CL1-A, T1, L1 and
CL1-D, T2, L1
• Designate a group name and confirm pair volume state:
# pairdisplay -g Oradb
Group PairVol(L/R) (P,T#,L#), Seq#, LDEV#..P/S, Status, Fence, Seq#, P-LDEV# M
oradb oradev1(L) (CL1-D, 2,1) 30053 19.. S-VOL COPY NEVER, ----- 18 -
oradb oradev1(R) (CL1-A, 1,1) 30053 18.. P-VOL COPY NEVER, 30053 19 -
oradb oradev2(L) (CL1-D, 2,2) 30053 21.. S-VOL COPY NEVER, ----- 20 -
oradb oradev2(R) (CL1-A, 1,2) 30053 20.. P-VOL COPY NEVER, 30053 21 -