HP XP Continuous Access Software - Manual (Page 286)

286 HP StorageWorks Disk Array XP RAID Manager: User’s Guide
Configuration file for HOSTA (/etc/horcm.conf) on page 285
HORCM_MON
#ip_address service poll(10ms) timeout(10ms)
HST1 horcm 1000 3000
HORCM_CMD
#dev_name
/dev/xxx (See “Note” on page 286 )
HORCM_DEV
#dev_group dev_name port# TargetID LU#
Oradb oradev1 CL1-A 1 1
Oradb oradev2 CL1-A 1 2
HORCM_INST
#dev_group ip_address service
Oradb HST2 horcm
Configuration file for HOSTB (/etc/horcm.conf) on page 285
HORCM_MON
#ip_address service poll(10ms) timeout(10ms)
HST2 horcm 1000 3000
HORCM_CMD
#dev_name
/dev/xxx (See “Note” on page 286 )
HORCM_DEV
#dev_group dev_name port# TargetID LU#
Oradb oradev1 CL1-D 2 1
Oradb oradev2 CL1-D 2 2
HORCM_INST
#dev_group ip_address service
Oradb HST1 horcm
Note
There must be at least one command device described in the configuration
definition for every instance. Up to 16 instances can use the same command
device via the same port. Instances beyond 16 must use a different SCSI
path.