HP XP Continuous Access Software - Manual (Page 122)

122 HP StorageWorks Disk Array XP RAID Manager: User’s Guide
Normally, this option is used to save the LUN signature
and volume layout information after it has been written
created (and before a paircreate).
–svinf[=PTN] (Windows NT/2000/2003 only) Uses SCSI Inquiry to
get the Serial# and LDEV# created by –gvinf of the
RAID for the target device, and sets the signature and
volume layout information in file VOLssss_llll.ini to
the target device.
This option will complete correctly even if the
Harddisk# is changed by the operating system. The
signature and volume layout information is managed by
the Serial# and LDEV# of RAID.
The –svinf=PTN option specifies a string pattern to
select only the pertinent output lines being provided
from STDIN.
This option returns 0 upon normal termination. A
nonzero return indicates abnormal termination.
-gplba (Windows NT/2000/2003 only) Displays usable LBA on
physical drives.
Fields
CLX-Y Displays the port number of the disk array.
Ser Displays the production (serial#) number of the disk
array.
LDEV Displays an LDEV# within the disk array.
CA Displays the attribute (PVOL/SVOL/SMPL) of a
volume as CA.
BC Displays the attribute (PVOL/SVOL/SMPL) of a
volume as BC.
Group Displays the group name (dev_group) defined in the
configuration file.