HP XP Continuous Access Software - Manual (Page 118)

118 HP StorageWorks Disk Array XP RAID Manager: User’s Guide
inqraid
Display array information HP-UX, Linux, Solaris, AIX, and MPE/iX only
Description
The inqraid command displays the relationship between a host device
special file and an actual physical drive in the disk array.
Syntax
inqraid { –h | quit | –inqdump | –f[x][p][l][g][w][h][c] | –find[c] |
special_file | –CLI [W|WP|WN] | –sort[–CM][-CLIB] | –inst | –gvinf |
–svinf | –fv | –fp | fg |
-gplba }]
Arguments
–h Displays Help/Usage.
–quit Terminates interactive mode and exits the command.
–inqdump Displays SCSI information in hexadecimal dump
format.
–fx Displays the LDEV number in hexadecimal format.
–fp Indicates an Oracle validation volume with the -CLI
option by appending “*” to the device file name.
–fl Indicates an LDEV Guard volume with the -CLI
option by appending “*” to the device file name.
–fv (Windows NT/2000/2003 only) Displays the
Volume{GUID} via $Volume in wide format.
-fg Displays a LUN in the host view by finding a host
group for XP 128 and XP 1024 arrays.
-fw Displays the cascading volume status on STD Inquiry
Page. If this option will not be specified, then the
display will show four cascading mirrors the same as at
present in order to maintain compatibility with the
current –CLI option.