Drivescan, Drivescan 215 – HP XP Continuous Access Software User Manual
Page 215

215
drivescan
Display disk drive and connection information
Windows NT/2000/2003 only
Description
The drivescan command displays the relationship between hard disk
numbers on Windows NT/2000/2003 and the actual physical drives.
Syntax
RM_command –x drivescan stringx
,y
Arguments
RM_command
Any general RM command.
string
Any alphabetic character string; provided for
readability.
x
,y
Specifies a range of disk drive numbers.
Output Fields
harddisk
n
The hard disk number.
Port
The port number on the device adapter.
PhId
The BUS number in the device adapter port.
TId
The target ID of the hard disk that connects to the
device adapter port. For information about Fibre
Channel address conversion, see Appendix ,
LUN
The logical unit number of the hard disk that connects
to the device adapter port. This item shows the LDEV#
of the LUN that completes a pair.