A.3.6 read_authentication_enable, A.3.7 read_automatic_flush_timeout, A.3.8 read_class_of_device – Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual User Manual
Page 99: A.3.9 read_connection_accept_timeout
81
CATC BTT
RAINER
2.20
A
PPENDIX
A
User’s Manual
A.3.6 Read_Authentication_Enable
Read_Authentication_Enable will read the value for the Authentication_Enable parameter,
which controls whether BTTrainer will require authentication for each connection with
other Bluetooth devices.
A.3.7 Read_Automatic_Flush_Timeout
A.3.8 Read_Class_of_Device
Read_Class_of_Device will read the value for the Class_of_Device parameter for
BTTrainer, which is used to indicate its capabilities to other devices.
A.3.9 Read_Connection_Accept_Timeout
Read_Connection_Accept_Timeout will read the value for the
Connection_Accept_Timeout parameter so that BTTrainer can automatically deny a
connection request after a specified period has occurred, and to refuse a new connection.
Command Parameters
Examples
Comments
N/A
Return Events
Read_Authentication_Enable_Complete
Read_Authentication_Enable_Error
Command Parameters
Examples
Comments
HCI_Handle
Command Parameters
Examples
Comments
N/A
Return Events
Read_Class_of_Device_Complete
Read_Class_of_Device_Error
Command Parameters
Examples
Comments
N/A
Return Events
Read_Connection_Accept_Timeout_Complete
Read_Connection_Accept_Timeout_Error