Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 217)

199
CATC BTT RAINER 2.11 C HAPTER
User’s Manual
HCIReadSCOFlowControlEnable
HCIReadSCOFlowControlEnable()
Return values
Returns a list with two values: status and SCO flow control enable.
Status (element 0) is one of the following:
• “Success”
• “Failure”
SCO flow control enable (element 1) is the one-byte SCO flow control
value. (0=SCO flow control disabled; 1=SCO flow control enabled.)
Comments
Reads the SCO flow control enable value. This value determines whether
the Host Controller will send Number Of Completed Packets events for
SCO Connection Handles.
Example
result = HCIReadSCOFlowControlEnable();
Trace("HCIReadSCOFlowControlEnable returned: ", result[0],
"\n");
if (result[0] == "Success")
{
Trace("SCO flow control enable is: 0x", result[1],
"\n");
}
HCIReadStoredLinkKey
HCIReadStoredLinkKey(Address, ReadAll)
Parameter Meaning Default Value Comments
N/A
Parameter Meaning Default Value Comments
Address Bluetooth
address of
device that
will have its
link key read