Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 272)

254
CATC BTT RAINER 2.11 C HAPTER
User’s Manual
Example
L2CAPConfigurationResponse("Reject-unknown options");
L2CAPConnectRequest
L2CAPConnectRequest(Address, PSM, ReceiveMTU)
Return value
Returns a list with three values: result, ACL Handle, and a list of all L2CAP
CIDs.
Result (element 0) is one of the following:
• “Success”
• “Failure”
• “Not found”
• “Not connected”
ACL Handle (element 1) is a unique identifier for an ACL connection.
List of all L2CAP CIDs (element 2) is a list of all channel identifiers for an
L2CAP connection with a particular device.
Comments
This command is used to establish an L2CAP channel to the specified
remote device.
Example
result = L2CAPConnectRequest('0080370DBD02', 0x1001,
0x1C2);
Trace("L2CAPConnectRequest returned: ", result[0], "\n");
if (result[0] == "Success")
{
Handle = result[1];
CID = result[2];
}
Parameter Meaning Default Value Comments
Address Bluetooth
address of the
remote device
PSM
ReceiveMTU 0x01C2