Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 254)

236
CATC BTT RAINER 2.11 C HAPTER
User’s Manual
Return value
Returns a list with two values: status and portSettings.
Status (element 0) is one of the following:
• “Success”
• “Failure”
• “Not Connected”
• “Timed Out”
portSettings (element 1) is a list containing the following five values:
• BaudRate (element 0) is a string containing the baud rate
• DataFormat (element 1) is a string containing data bits, stop bits, and
parity settings
• FlowControl (element 2) is a string indicating port flow control options
• Xon (element 3) is a string containing the XON character
• Xoff (element 4) is a string containing the XOFF character
Comments
Requests the port settings on a particular RFCOMM connection.
Example
result = RFOpenClientChannel(Device, 1);
DLCI = result[1];
if(result[0] == "Success")
{
res = RFRequestPortStatus(Device, DLCI);
Trace("RFRequestPortStatus returned: ", res[0], "\n\n");
if (res[0] == "Success")
{
settingsList = res[1];
Trace("BaudRate: ", settingsList[0], "\n");
Trace("DataFormat: ", settingsList[1], "\n");
Trace("Xon: ", settingsList[3], "\n");
Trace("Xoff: ", settingsList[4], "\n");
}
}