Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 80)

62
CATC BTT RAINER 2.20 C HAPTER 7
User’s Manual Device Search and Device List Pop-Up Menu
Step 4
To see the results of the search, click the Device List tab in the Device Status
window. To see the commands and responses from the Inquiry, view the
Event Log in the Logs window.
7.2 Device List Pop-Up Menu
The Device List Pop-Up Menu presents options for setting up ACL and audio (SCO)
connections, displaying remote device information, and terminating connections. The
Pop-Up Menu can be accessed by right-clicking on one or more devices in the Device List.
It can be used as an alternative to Profile Wizard, Command Generator, and Script Manager
for performing some commands.
Note: The Device List Pop-Up Menu is not accessible while the Profile Wizard is running.
7.2.1 Create an ACL Connection
An HCI ACL connection to a remote device can be established via the Device List Pop-Up
Menu.
Note: The following instructions assume that a Device Search has been performed and devices are displayed
in the Device List. For information about performing a device search, please see Section 6.1, “Device
Search,” on page 55.
Step 1 Open the Pop-Up Menu by right-clicking on the target device in the Device
List.
The Device List Pop-Up Menu will open.
Step 2
Choose Connect from the menu.
The status of the target device should change from In Range to Connected in
the Device List. The Piconet tab should now indicate that BTTrainer has an
ACL connection to the target device.
7.2.2 Establish an Audio Connection
An HCI SCO connection to a device that supports audio connections can be established via
the Device List Pop-Up menu.
Note: In order to verify that BTTrainer and a Bluetooth wireless audio device are successfully connected, a
headset will need to be plugged into the audio port on BTTrainer. Be sure that the headset is plugged
in before initializing the connection between BTTrainer and a Bluetooth device.
Note: The following instructions assume that a Device Search has been performed and devices are displayed
in the Device List. For information about performing a device search, please see Section 6.1, “Device
Search,” on page 55.
Step 1
Open the Pop-Up Menu by right-clicking on the target device in the Device
List.
The Device List Pop-Up Menu will open.
Step 2
Choose Connect from the menu.