Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 105)

87
CATC BTT RAINER 2.20 A PPENDIX A
User’s Manual
A.3.29 Set_Event_Filter
Set_Event_Filter is used by the Host to specify different event filters. The Host may issue
this command multiple times to request various conditions for the same type of event filter
and for different types of event filters.
Return Events
Reset_Complete
Command Parameters Examples Comments
FilterType 0x00 0x00=Clear All Filters
0x01=Inquiry Result
0x02=Connection Setup
FilterConditionType 0x00 0x00=New device responded to
the Inquiry process
0x01= Device with a specific
Class of Device responded to
the Inquiry process.
0x02=Device with specific
BD_ADDR responded to the
Inquiry process.
Condition 0x01 0x00=Allow Connections from
all devices
0x01=Allow Connections from
a device with a specific Class of
Device
0x02=Allow Connections from
a device with a specific
BD_ADDR
Return Events
Set_Event_Filter_Complete
Set_Event_Filter_Error