A.2.9 switch_role, A.2.10 write_link_policy_settings, A.3 hci host controller & baseband commands – Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual User Manual
Page 97: A.3.1 change_local_name, Switch_role write_link_policy_settings, Hci host controller & baseband commands, Change_local_name
79
CATC BTT
RAINER
2.20
A
PPENDIX
A
User’s Manual
A.2.9 Switch_Role
Switches the current role (master/slave) of the calling device with the role of the device
specified.
A.2.10 Write_Link_Policy_Settings
Writes link policy settings for the specified ACL link.
A.3 HCI Host Controller & Baseband Commands
A.3.1 Change_Local_Name
Change_Local_Name allows the user-friendly name to be modified for the BTTrainer.
Command Parameters
Examples
Comments
BD_ADDR
0x010203040506
Return Events
Role_Change_Complete
Role_Change_Error
Command Parameters
Examples
Comments
HCI_Handle
0x0001
Link_Policy_Settings
0xF
0x0000: Disable all LM modes
0x0001: Enable master/slave
switch
0x0002: Enable Hold Mode
0x0004: Enable Sniff Mode
0x0008: Enable Park Mode
0xF: Enable all (Default)
Return Events
Write_Link_Policy_Settings_Complete
Write_Link_Policy_Settings_Error
Command Parameters
Examples
Comments
Name
BTTrainer
Maximum string length =32
characters
Return Events
Change_Local_Name_Complete
Change_Local_Name_Error