Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 58)

40
CATC BTT RAINER 2.20 C HAPTER 4
User’s Manual Profile Wizard
Step 3
Select “Add/Troubleshoot a device” and click Next.
The Wizard will look for Plug and Play hardware, then it will display a list
of all the hardware it finds on the computer.
Step 4 Select “Add a new device” from the list and click Next.
Step 5
Select “No, I want to select the hardware from a list” and click Next.
Step 6 Select “Ports (COM and LPT)” from the list and click Next.
Step 7
Click the Have Disk button.
Step 8 Click the Browse button so that you can browse to the driver file, which you
should be able to find either on the installation CD-ROM or in the directory
in which BTTrainer is installed.
When you have located the file, click Open.
Step 9
Click OK to use the file you have selected.
Step 10
Select “CATC Bluetooth Serial Port” and click OK.
Step 11
Click Next to install the driver.
Step 12 Click Finish to complete the installation.
Ascertain the COM Port Number
Step 1
Select Start > Settings > Control Panel from the desktop taskbar, then
double-click on System in the Control Panel window.
The System Properties dialog will open.
Step 2
Select the Hardware tab and click the Device Manager button.
The Device Manager will open.
Step 3
Expand the Ports (COM & LPT) level and locate the CATC Bluetooth Serial
Port.
Step 4
Note the port number for the CATC Bluetooth Serial Port. You will need to
know the number in order to install things such as the fax modem driver that
is necessary to connect to a fax device.
4.6 Install a Modem Driver on the Virtual COM Port
In order to perform dial-up networking or use a fax application to send fax data through
BTTrainer, you need to install a modem driver on the virtual COM port.
On Windows 2000:
Step 1
Complete steps 1-3 in Section 4.2.1, “Connect to Device: Dial-Up Gateway”
on page 23 or in Section 4.2.2 on page 24.
BTTrainer must be connected to the Dial-Up or Fax Gateway device before
installing the modem driver.