Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 66)

48
CATC BTT RAINER 2.20 C HAPTER 5
User’s Manual Command Generator
Host Controller & Baseband Commands
Switch_Role BD_ADDR
Write_Link_Policy_Settings HCI_Handle
Link_Policy_Settings
Table 5-4: Unsupported HCI Link Policy commands
Commands
All Link Policy commands are supported in Command Generator.
Table 5-5: Supported HCI Host Controller & Baseband commands
Commands Parameters
Change_Local_Name Name
Create_New_Unit_Key N/A
Delete_Stored_Link_Key BD_ADDR
Delete_All_Flag
Flush HCI_Handle
Host_Buffer_Size ACL_Data_Length
SCO_Data_Length
Total_Num_ACL
Total_Num_SCO
Read_Authentication_Enable N/A
Read_Automatic_Flush_Timeout HCI_Handle
Read_Class_of_Device N/A
Read_Connection_Accept_Timeout N/A
Read_Current_IAC_LAP N/A
Read_Encryption_Mode N/A
Read_Hold_Mode_Activity N/A
Read_Inquiry_Scan_Activity N/A
Read_Link_Supervision_Timeout HCI_Handle
Read_Local_Name N/A
Read_Num_Broadcast_Retransmissions N/A
Read_Number_Of_Supported_IAC N/A
Read_Page_Scan_Activity N/A
Read_Page_Scan_Mode N/A
Read_Page_Scan_Period_Mode N/A
Read_Page_Timeout N/A
Read_PIN_Type N/A
Read_Scan_Enable N/A
Read_SCO_Flow_Control_Enable N/A
Read_Transmit_Power_Level HCI_Handle
Table 5-3: Supported HCI Link Policy commands (Continued)
Commands Parameters