Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 297)

279
CATC BTT RAINER 2.11 C HAPTER
User’s Manual
HCICatcPage
HCICatcPage(Address, TestScenario, NumberOfTimes)
Return value
• "Success"
• "Failure"
• "Invalid Parameter"
• "Timed out"
Comments
This command supports TCI functionality that requires BtTrainer to initiate
a modified Page procedure to the IUT, as required by the Bluetooth Base-
band test cases.
Parameter Values Description
Device
Address Bluetooth address of the paged device.
TestScenario 0x00 Return to use the normal Page
0x01 The tester pages the IUT only in the first half of the Tx time slot. After
receiving response, the tester does not send an FHS packet. The test
continues according to TP/PHYS/PAG/BV-10-C or
TP/PHYS/PAG/BV-11-C test case according to the current Country Code.
0x02 The tester pages the IUT only in the second half of the Tx time slot. After
receiving response, the tester does not send an FHS packet. The test
continues according to TP/PHYS/PAG/BV-12-C or
TP/PHYS/PAG/BV-13-C test case according to the current Country Code.
0x03 The tester pages the IUT until the response ID is received. The tester does
not respond with FHS, but waits 16 slots, then 8 slots, and then an additional
randomly chosen 0-1023 slots. Perform the test according to
TP/PHYS/PAG/BV-14-C test case and current page scheme.
0x04 The tester pages the IUT until the response ID is received. The tester does
not respond with FHS, but waits 16 slots, then 8 slots, and then an additional
randomly chosen 0-2047 slots. Perform the test according to
TP/PHYS/PAG/BV-16-C test case and current page scheme.
0x05 The tester pages the IUT until the response ID is received. The tester does
not respond with FHS, but waits 16 slots, then 8 slots, and then an additional
randomly chosen 0-4095 slots. Perform the test according to
TP/PHYS/PAG/BV-18-C test case and current page scheme.
0x06-0xFF Reserved
NumberOf
Times Number of times to repeat the test.