Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 59)

41
CATC BTT RAINER 2.20 C HAPTER 4
User’s Manual Profile Wizard
Step 2
Select Start > Settings > Control Panel from the desktop taskbar, then
double-click on Add/Remove Hardware in the Control Panel window.
The Add/Remove Hardware Wizard will open.
Step 3 Click Next.
Step 4
Select “Add/Troubleshoot a device” and click Next.
The Wizard will look for Plug and Play hardware, then it will display a list
of all the hardware it finds on the computer.
Step 5
Select “Add a new device” from the list and click Next.
Step 6
Select “No, I want to select the hardware from a list” and click Next.
Step 7
Select “Modems” from the list and click Next.
Step 8
Check “Don’t detect my modem; I will select it from a list.” and click Next.
Step 9
Select the manufacturer and model of your modem and click Next.
Step 10
Select the virtual COM port from the list and click Next.
Note: To find out the number of the virtual COM port, refer to “Ascertain the COM
Port Number” on page 40.
Step 11
Click the Finish button to complete the installation.
4.7 Installation of Network Driver
BTTNet.sys driver + INF
Step 1 Open ‘Control Panel’
Step 2
Select ‘Add/Remove Hardware’ icon.
Step 3 Select the ‘Add/Troubleshoot a device’ radio button. Pressing Next would
make the system try to search for new HW devices.
Step 4
In the Device List, select “Add a new device” entry. Press Next button.
Step 5
Select the “No, I want to select the hardware from a list” radio button. Press
Next.
Step 6 Select “Network Adapters” entry. Press Next.
Step 7
In the ‘Select Network Adapter’ page, press “Have Disk ...” button.
Step 8 Browse for the BTTNet.INF file and select it by pressing the “Open” and
“OK” buttons. The list of network adapters should include the driver “CATC
Bluetooth Trainer PAN virtual NIC.”
Step 9
Press Next.
Step 10
In the “Start Hardware Installation” page, press the Next button. At this time,
Windows installs the driver and plots a proper text in the installation wizard.
Step 11 Press Finish.