Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 61)

43
CATC BTT RAINER 2.20 C HAPTER 5
User’s Manual Command Generator
C
HAPTER
5: C
OMMAND
G
ENERATOR
The Command Generator is a tool in BTTrainer that presents a menu of protocol commands
so that you can select and execute any command in virtually any sequence. Command
Generator thus gives maximum control over the traffic generation process.
Command Generator requires that you build connections from the Baseband level on up.
This means that to establish an OBEX connection, for example, you will need to first start
with Baseband and work your way up the protocol stack. You cannot simply start at a higher
protocol.
The utility displays a window with tabs for these protocols: HCI (which includes Baseband,
LMP and Module-Specific Commands), L2CAP, SDP, RFCOMM, TCS, BNEP, OBEX and
TCI. Clicking a tab or a name in the protocol stack graphic opens a window and presents a
menu of commands for that protocol.
5.1 Command Generator Interface
The Command Generator utility is composed of the following:
• Tabs — There are eight tabs: HCI, L2CAP, SDP, RFCOMM, TCS, BNEP, OBEX, and
TCI. Clicking a tab displays the Command Menu for the chosen protocol.
• Command Menus — A list of commands is provided for each protocol.
• Parameters Combo Boxes — Parameters can be entered via the six combo boxes. One
or more of the boxes may be activated, depending on which command is currently