Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 95)

77
CATC BTT RAINER 2.20 A PPENDIX A
User’s Manual
A.2.4 Set_Park_Mode
Places the specified ACL link into Park mode.
A.2.5 QoS_Setup
Used to specify Quality of Service parameters for a connection handle.
Max_Interval 0xFFFF 0x0001 - 0xFFFF
Min_Interval 0x01 0x0001 - 0xFFFF
Return Events
Mode_Change
Hold_Mode_Error
Command Parameters Examples Comments
HCI_Handle 0x0001
Beacon_Max_Interval 0xFFFF 0x0001 - 0xFFFF
Beacon_Min_Interval 0x01 0x0001 - 0xFFFF
Return Events
Mode_Change
Park_Mode_Error
Command Parameters Examples Comments
HCI_Handle 0x0001
ServiceType 0x01 0=No traffic;
1=Best effort;
2=Guaranteed
TokenRate 0 Token rate in Bytes/second
PeakBandwidth 0 Bytes per second
Latency 0xFFFFFFFF In microseconds
DelayVariation 0xFFFFFFFF In microseconds
Return Events
Quality_of_Service_Setup_Complete
Quality_of_Service_Setup_Error
Command Parameters Examples Comments