A.3.48 write_voice_setting, A.4 hci informational commands, A.4.1 read_bd_addr – Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual User Manual
Page 112: A.4.2 read_buffer_size, Write_voice_setting, Hci informational commands, Read_bd_addr read_buffer_size
94
CATC BTT
RAINER
2.20
A
PPENDIX
A
User’s Manual
A.3.48 Write_Voice_Setting
The Write_Voice_Setting command will write the values for the Voice_Setting parameter
into BTTrainer, which controls all the various as settings for the voice connections.
A.4 HCI Informational Commands
A.4.1 Read_BD_ADDR
Read_BD_ADDR will read the value of BTTrainer’s address. The BD_ADDR is a 48-bit
unique identifier for a Bluetooth device.
A.4.2 Read_Buffer_Size
Read_Buffer_Size returns the size of the HCI buffers in BTTrainer. These buffers are used
by BTTrainer’s Host Controller to buffer data that is to be transmitted.
Return Events
Write_Stored_Link_Key_Complete
Write_Stored_Link_Key_Error
Command Parameters
Examples
Comments
HCI_Handle
0x0001
Voice_Setting
0x0062
0x0060=CVSD coding
0x0061=u-Law coding
0x0062=A-law coding
Return Events
Write_Voice_Setting_Complete
Write_Voice_Setting_Error
Command Parameters
Examples
Comments
N/A
Return Events
Read_BD_ADDR_Complete
Read_BD_ADDR_Error
Command Parameters
Examples
Comments
N/A