Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 82)

64
CATC BTT RAINER 2.20 C HAPTER 7
User’s Manual Device Search and Device List Pop-Up Menu
Step 2
Select Delete.
The device(s) will be removed from the Device List.
7.2.5 Disconnect All
A fast and easy way to terminate all connections that BTTrainer has established with remote
devices is to use the Disconnect All… command on the Device List Pop-Up Menu.
Step 1 Open the Pop-Up Menu by right-clicking on a device.
Step 2
Select Disconnect All…
The Existing Connections dialog will open, displaying all pending
connections.
Step 3
Click the Disconnect All button in the Existing Connections dialog to close
the connections, or click Cancel to leave them open.
Note: When switching between Profile Wizard, Command Generator and Script
Manager, all connections that have been established between BTTrainer and
another Bluetooth device should be closed. However, expert users may
choose to leave the connections open. If a connection is left open and you
attempt to switch tools, BTTrainer will prompt you to close the connections.
Choosing Disconnect All will close the connections. Choosing Cancel will
leave the connections open, but some commands might not work properly in
the other tool. When switching to Profile Wizard, any open connections must
be closed.